Roofing and Rainwater Collection Systems

Going eco-friendly has quickly gain popularity for several reasons varying from environmental responsibility to revenue generation and savings. As people install upgraded weathering, siding, home windows, and method at home, they have a tendency to overlook the possibilities which are open with roofing. Utilizing a material that’s recycled is a superb part of being eco-friendly. Solar systems like solar shingles may even power your house, lowering your energy costs, greatly. However, roofing systems may also collect rainwater for future reuse.

Rainwater Collection

Rainwater collection may be the accumulation of rainwater for future use. Usually this happens prior to the rainwater reaches the local aquifer. The machine is composed of a couple of fundamental components

Catchment Area





The catchment area may be the area which the rainwater is collected, normally the roof. Conveyance refers back to the transportation from the rainwater in the catchment place to the storage and is the gutters and downspots of the roof. Storage refers back to the storage tank where rainwater is collected. To ensure that rainwater to become consumed it should be treated.

Many large property proprietors may also treat water for farming and ranching needs. Distribution refers back to the distribution from the collected water within the storage to the final destination or use within and outdoors of the house.

Several factors are believed to look for the effectiveness and efficiency of the rainwater collection system. Roofing materials, the slope from the roof, and how big the rooftop are typically considered when making the catchment area or roof.

Roofing Materials – No Obvious Champion

While newer roofing materials do have a tendency to outshine older materials, this year the Texas Water Development Board determined the material from the roofing isn’t nearly as essential as the contaminants it provides off. Within their study they discovered that rainwater collected contained TC, FC, Fe, and AI, all above E.P.A. consuming water standards.

No roofing materials stick out because the better to use along the way so far as effectiveness either. Both recycled roofing materials and “eco-friendly roofing” materials produce contaminants that must definitely be treated just before consuming.

Slope from the Roof – Steep versus Flat

The slope from the roof is the “position” from the roof simply put ,. This position along with the pressure of gravity on water’s mass, determines the rate from the rainwater runoff. While you would make a flat or low slope roof will retain water in comparison against a high slope roof. However, since the objective of the catchment area or roof would be to funnel the rainwater in to the gutters or conveyance system, the position or slope from the roof ought to be determined according to your storage capacity and requires.

The slope from the roof ought to be determined in a fashion that will reduce contamination around the catchment area and enables rainwater to circulate unobstructed, into storage for processing.

Size Matters – Bigger is much better

Size is important using the catchment part of a rainwater collection system as it will likely be a controlling element in just how much rain could be collected. The greater square area a roof covering has, the greater rainwater could be collected. How big the catchment area may be the entire sq footage of the roof.